360
Wh
Energy capacity
48
V
Nominal voltage
2
h
for full charging cycle
5.7
lbs
Weight (2.7 kg)
-20 to 60 °C
Operating Temperature
0 to 45 °C
Charging Temperature
0 to 30 °C
Storage Temperature

The maxon BIKEDRIVE BX360 ONE lithium ion battery provides 360 Watt-hours (Wh) of energy uphill, downhill, or on flat sections of the trail. LED lights indicate the battery level. It is 70% charged in 1 hour and fully charged in 2 hours.

Because the maxon BIKEDRIVE was designed using extremely efficient Ironless winding technology, and operates at very high efficiency (85% typical), the motor can provide an impressively high distance range with relatively a low weight/Watt-hour battery. Since the motor has a built in freewheel and clutch, pedaling your bike without powered assistance is no problem and offers very low resistance. And if you want to convert your maxon BIKEDRIVE bike back to a normal bike, this is also no problem.  Simply remove the battery and swap the rear wheel, no special tools are required.

500
Wh
Energy capacity
48
V
Nominal voltage
3.5
h
for full charging cycle
6.1
lb
Weight (2.8kg)
-20 to 50 °C
Operating Temperature
10 to 40 °C
Charging Temperature
0 to 30 °C
Storage Temperature

The maxon BIKEDRIVE BX500 lithium ion battery provides 500 Watt-hours (Wh) of energy uphill, downhill, or on flat sections of the trail. LED lights indicate the battery level. It is 70% charged after 150 min. and fully charged in 3.5 hoursCharging time may vary depending on ambient conditions and battery operating temperature..

Because the maxon BIKEDRIVE was designed using extremely efficient Ironless winding technology, and operates at very high efficiency (85% typical), the motor can provide an impressively high distance range with relatively a low weight/Watt-hour battery. Since the motor has a built in freewheel and clutch, pedaling your bike without powered assistance is no problem and offers very low resistance. And if you want to convert your maxon BIKEDRIVE bike back to a normal bike, this is also no problem.  Simply remove the battery and swap the rear wheel, no special tools are required.

20
mph
Speed
50
Nm
Max. torque
85
%
Efficiency (typical)
7
lbs
Weight (3.5 kg)

Designed and manufactured in Switzerland, the maxon electric BIKEDRIVE accelerates from 0 to 20 mph in less than 3 seconds. It also enables an average weight cyclist (175 lbs) to climb an altitude of 3200 ft at 10% average incline in less than 30 minutes.

The maxon BIKEDRIVE MX25 was designed to be a pedal assist system, the motor only provides additional torque while you are pedaling. The power and speed is electronically limited e.g. to 20 mph (USA) or 25 km/h (Switzerland) to comply with Federal Regulations for e-bikes, so it can be enjoyed on the road or on the trail.

28
mph
Speed
40
Nm
Max. torque
85
%
Efficiency (typical)
7
lbs
Weight (3.5 kg)

Designed and manufactured in Switzerland, the maxon electric BIKEDRIVE accelerates from 0 to 20 mph in less than 3 seconds. It also enables an average weight cyclist (175 lbs) to climb an altitude of 3200 ft at 10% average incline in less than 30 minutes.

The maxon BIKEDRIVE S-Pedelec was designed to be a pedal assist system, the motor only provides additional torque while you are pedaling. The power and speed is electronically limited e.g. to 28mph (USA) or 45km/h (Switzerland) to comply with Federal Regulations for e-bikes, so it can be enjoyed on the road or on the trail.

40
Nm
max. torque
115
rpm
max. supported cadence
25
km/h
speed
1.9
kg
weight

The drive unit consists of a brushless maxon EC internal-rotor motor and a single-stage performance planetary gearhead. With the e-bike system, down tube designs with diameters as small as 60 mm are possible. The Q factor starts at only 155 mm and the innovative freewheel has no noticeable resistance. It is possible to mount either racing or MTB chain rings.

36
V
voltage
250
Wh
capacity
3.5
hours
for a full charge
1.4
kg
weight

The lithium-ion battery is permanently mounted in the down tube and can only be removed by the specialist dealer, if necessary. It combines low weight with an energy capacity of 250 Wh. At only 1.4 kg, it weighs roughly the same as a large bottle of water.

36
V
voltage
250
Wh
capacity
3.5
hours
for a full charge
1.4
kg
weight

A Range Extender is available for longer rides and adds another 250 Wh. It works like a power bank and charges the integrated battery. The Range Extender can be stored in your backpack or inserted in a BIKEDRIVE AIR bottle holder and connect to the system with a cable.

Battery display (SOC)
3 support levels: Cruise, Push, Blast
Bluetooth (BLE) and ANT+
Light switch (optional)

The HMI gives you full control over your e-bike. You can connect it to your smartphone via Bluetooth (BLE), or to other devices from Garmin, Sigma, or o-synce via ANT+. You can choose between three levels of support and configure them individually. In the factory settings, there are three preset modes: Cruise (gentle tailwind), Push (sport mode), Blast (lots of power for steep inclines). An inconspicuous and intuitive shifter for the racing bike or mountain bike handlebars is available as an option.